OTD500 Outdoor 5G Router

Mobile:

    Mobile module

    5G Sub-6Ghz SA/NSA 2.4/3.4Gbps DL (4x4 MIMO), 900/550 Mbps UL (2x2); 4G LTE – LTE Cat 19 1.6Gbps DL/200Mbps UL; 3G up to 42 Mbps DL/5.76Mbps UL

    3GPP Release

    Release 16

    eSIM

    Consumer type eSIM, profile download and removal operations, up to 7 eSIM profiles; does not include data plans

    SIM switch

    2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection

    Status

    IMSI, ICCID, operator, operator state, data connection state, network type, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, and MNC

    SMS

    SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP

    USSD

    Supports sending and reading Unstructured Supplementary Service Data messages

    Black/White list

    Operator black/white list (by country or separate operators)

    Band management

    Band lock, Used band status display

    SIM idle protection service

    When working with devices with two SIM slots, the one not currently in use will remain idle until the device switches to it, meaning that no data is used on the card until then

    SIM PIN code management

    SIM PIN code management enables setting, changing, or disabling the SIM card's PIN

    APN

    Auto APN

    Bridge

    Direct connection (bridge) between mobile ISP and device on LAN

    Passthrough

    Router assigns its mobile WAN IP address to another device on LAN

    Framed routing

    Framed routing: support an IP network behind 5G UE

Ethernet

    ETHERNET

    2 x ETH ports (can be configured as WAN), 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover

POE IN

    PoE ports

    1 x PoE In

    PoE standards

    802.3af/at

POE OUT

    PoE ports

    1 x PoE Out

    PoE standards

    802.3af Alternative B

    PoE Max Power per Port (at PSE)

    15 W Max (power supply unit dependent)

Network

    Routing

    Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing

    Network protocols

    TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL), VXLAN

    VoIP passthrough support

    H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets

    Connection monitoring

    Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection

    Firewall

    Port forward, traffic rules, custom rules, TTL target customisation

    Firewall status page

    View all your Firewall statistics, rules, and rule counters

    Ports management

    View device ports, enable and disable each of them, turn auto-configuration on or off, change their transmission speed, and so on

    Network topology

    Visual representation of your network, showing which devices are connected to which other devices

    DHCP

    Static and dynamic IP allocation, DHCP relay, DHCP server configuration, status, static leases: MAC with wildcards

    QoS / Smart Queue Management (SQM)

    Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e

    DDNS

    Supported >25 service providers, others can be configured manually

    DNS over HTTPS

    DNS over HTTPS proxy enables secure DNS resolution by routing DNS queries over HTTPS

    Network backup

    VRRP, Wired options, each of which can be used as an automatic Failover

    Load balancing

    Balance Internet traffic over multiple WAN connections

    Hotspot

    Captive portal (hotspot), internal/external Radius server, Radius MAC authentication, SMS authorisation, SSO authentication, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customisable themes and optionality to upload and download customised hotspot themes

    SSHFS

    Possibility to mount remote file system via SSH protocol

    VRF support

    Initial virtual routing and forwarding (VRF) support

    Traffic Management

    Real-time monitoring, wireless signal charts, traffic usage history